Pages - Menu

▼

Monday, 15 July 2013

Hole Basis system and Shaft Basis System

Hole Basis system: If the system of assembly of shaft and hole is consisting of basic hole, then that type of system is known as Hole Basis System. It means for the system of assembly of shaft and hole, the zero line will be lying on the minimum diameter of the hole as shown figure. For this system the lower limit size of hole is equal to basic size.

Hole basis system


Shaft Basis system: If the system of assembly of shaft and hole consisting of basic shaft, then that type of system is known as Shaft Basis System. It means for the assembly of shaft and hole, the zero line will be lying on the maximum size of the shaft as shown. For this system the Upper Limit Size of shaft is equal to the Basic Size.



Shaft Basis System
at

23 comments:

  1. Unknown5 December 2014 at 20:34

    simple and clear explanation

    ReplyDelete
  2. Unknown1 March 2015 at 01:42

    simply done

    ReplyDelete
  3. Unknown18 December 2015 at 10:08

    great sir!

    ReplyDelete
  4. Unknown12 January 2016 at 21:12

    clear and understanding explanation!!

    ReplyDelete
  5. Unknown12 January 2016 at 21:32

    clear and understanding explanation!!

    ReplyDelete
  6. Unknown12 January 2016 at 21:33

    very nice!!!

    ReplyDelete
  7. Unknown26 June 2016 at 07:24

    Easy to remember

    ReplyDelete
  8. Unknown2 November 2016 at 01:07

    Good good

    ReplyDelete
  9. Unknown8 June 2017 at 04:40

    Quickly grasped

    ReplyDelete
  10. Unknown15 July 2017 at 21:54

    What is the application of shaft basic system and hole basic system?

    ReplyDelete
  11. Unknown16 August 2017 at 23:25

    Simply super...

    ReplyDelete
  12. Unknown16 August 2017 at 23:26

    Simply super...

    ReplyDelete
  13. Unknown18 September 2017 at 10:49

    sir superb and show the clear
    idea.

    ReplyDelete
  14. Unknown8 October 2017 at 11:52

    Easy

    ReplyDelete
  15. Unknown21 October 2017 at 16:59

    Great sir

    ReplyDelete
  16. Zaxsys7 November 2017 at 23:37

    As simple as that

    ReplyDelete
  17. jips10 July 2018 at 05:18

    That is so great,thank you sir with this am going to pass my exam

    ReplyDelete
  18. Anonymous15 April 2019 at 03:09

    too good

    ReplyDelete
  19. Unknown8 October 2020 at 02:48

    nice idea

    ReplyDelete
  20. Sumit Garg6 May 2025 at 04:24

    Nice post , also check out this post EN19 Flat Bar


    ReplyDelete
  21. Kalonis Darksbane10 May 2025 at 02:29

    I appreciate your work and you can also read our blog about EN19 Flat Bar


    ReplyDelete
  22. Kalonis Darksbane27 May 2025 at 03:02

    i like your blog

    ReplyDelete
  23. Kalonis Darksbane27 May 2025 at 03:03

    Nice blog you can also read our latest blog here Abrasion Resistant Steel Plate Supplier

    ReplyDelete